Job Description
Responsibilities for this Position
Position Title: Gauge Process Engineer
Location: Scranton, PA, United States
Category: Engineering
Job Type: Full-Time
Country: United States
State: PA
City: Scranton
Remote Work Options: On-Site
Security Clearance Required: Ability to obtain security clearance
Career Level: Junior
Requisition ID: 16249036
Description: General Dynamics Land Systems is a global leader in the design, development, production, support and sustainment of tracked and wheeled military equipment, specifically the Abrams Main Battle Tank and the Stryker Family of Wheeled Combat Vehicles.
Responsibilities include but not limited to: - Develops and designs gauge requirements for checking of parts based on accuracy, cost, and areas of use.
- Accuracy is dictated by print and project requirements
- Areas of use would be location of parts during testing (i.e. fixture in machine, in captive state outside machine fixture, or free state)
- Areas of use can also be environmental - in locations of extreme heat, wet locations, etc.
- Monitors and Initiates In-house Calibration of equipment by outside sources.
- Reviews, determines impact on product, and dispositions gauges returned that do not meet calibration requirements.
- Locates stored gages, replacement gages, or orders new gages to maintain quality requirements.
- Designs and updates calibration procedures, inspection process work instructions, and calibration acceptance criteria for specialized gauges / fixtures.
- Reviews Process Operation Sheets for completeness and Gage assignments that match inspection operation listings.
- Works closely with Tool Engineering to determine effective operator in-process measurements
- Works closely with Tool Engineering to determine necessary additional inspection requirements based on process / tooling used
- Develops and maintains inspection operation check sheets for checking lot quantities of parts in a productive sequential format based on design requirements
- Maintains scheduled process control samples submissions and report documents.
- Organizes and programs CMM software (PCDMIS) to verify production parts.
- Dispositions potential discrepant material to determine the next steps in its process flow.
- Perform tasks in other areas of Quality Assurance as may be assigned.
Position Requirements. - Must be a US Person.
- Must be at least 18 years of age.
- College Degree in Engineering or Business preferred
- Interface with Production Team Leaders, Production Control, Operations Engineering, Tool Makers, CNC operators, general machinists, painters, assemblers, welders, quality inspectors and material handlers within a unionized workforce.
- Demonstrate effective communication, presentation, and computer skills.
Work Environment/Demands: This job is performed in an office and heavy manufacturing environment.
This role routinely requires standing, walking, sitting, bending, personal interactions for extended periods, and uses standard office equipment such as computers, copiers, scanners, and phones.
Exposure to manufacturing environments containing noise, odors, temperature changes, and moving equipment.
Headquartered in Reston, Virginia, General Dynamics is a global aerospace and defense company offering a broad portfolio of products and services in business aviation; ship construction and repair; land combat vehicles, weapons systems and munitions; and technology products and services. General Dynamics employs more than 100,000 people across 65 countries worldwide and in all 50 U.S. states, more information is available at General Dynamics Land Systems, is a business unit of General Dynamics, and is an innovative leader of ground combat systems' equipment and software for our clients. Our performance-driven team partners with the U.S. Army, U.S. Marine Corp and other militaries across the Globe to ensure that next generation ground combat vehicles are ready to protect our fighting men and women in uniform. General Dynamics Lands Systems provides a competitive compensation package, site specific flexible work schedules, 401(k) with Company Match; Bonus Eligibility, Employee Development Opportunities, Tuition Reimbursement, On-site Amenities, and comprehensive Medical/Dental/Vision Insurance.
As an Equal Opportunity Employer, General Dynamics Land Systems ("GDLS") provides all persons with equal opportunity and access to all aspects of employment process, without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, marital status, age, disability, status as a protected veteran, or membership in any group protected by federal, state, or local anti-discrimination laws. GDLS also is committed to providing reasonable accommodations to individuals with disabilities and disabled veterans.. If, due to a disability, you need an accommodation to search or apply for an opportunity with GDLS, please call 586-825-4000 or send an e-mail to for assistance and let us know the nature of your request and your contact information.
General Dynamics Land Systems is a global leader in the design, development, production, support and sustainment of tracked and wheeled military equipment, specifically the Abrams Main Battle Tank and the Stryker Family of Wheeled Combat Vehicles.
Responsibilities include but not limited to: - Develops and designs gauge requirements for checking of parts based on accuracy, cost, and areas of use.
- Accuracy is dictated by print and project requirements
- Areas of use would be location of parts during testing (i.e. fixture in machine, in captive state outside machine fixture, or free state)
- Areas of use can also be environmental - in locations of extreme heat, wet locations, etc.
- Monitors and Initiates In-house Calibration of equipment by outside sources.
- Reviews, determines impact on product, and dispositions gauges returned that do not meet calibration requirements.
- Locates stored gages, replacement gages, or orders new gages to maintain quality requirements.
- Designs and updates calibration procedures, inspection process work instructions, and calibration acceptance criteria for specialized gauges / fixtures.
- Reviews Process Operation Sheets for completeness and Gage assignments that match inspection operation listings.
- Works closely with Tool Engineering to determine effective operator in-process measurements
- Works closely with Tool Engineering to determine necessary additional inspection requirements based on process / tooling used
- Develops and maintains inspection operation check sheets for checking lot quantities of parts in a productive sequential format based on design requirements
- Maintains scheduled process control samples submissions and report documents.
- Organizes and programs CMM software (PCDMIS) to verify production parts.
- Dispositions potential discrepant material to determine the next steps in its process flow.
- Perform tasks in other areas of Quality Assurance as may be assigned.
Position Requirements. - Must be a US Person.
- Must be at least 18 years of age.
- College Degree in Engineering or Business preferred
- Interface with Production Team Leaders, Production Control, Operations Engineering, Tool Makers, CNC operators, general machinists, painters, assemblers, welders, quality inspectors and material handlers within a unionized workforce.
- Demonstrate effective communication, presentation, and computer skills.
Work Environment/Demands: This job is performed in an office and heavy manufacturing environment.
This role routinely requires standing, walking, sitting, bending, personal interactions for extended periods, and uses standard office equipment such as computers, copiers, scanners, and phones.
Exposure to manufacturing environments containing noise, odors, temperature changes, and moving equipment.
Headquartered in Reston, Virginia, General Dynamics is a global aerospace and defense company offering a broad portfolio of products and services in business aviation; ship construction and repair; land combat vehicles, weapons systems and munitions; and technology products and services. General Dynamics employs more than 100,000 people across 65 countries worldwide and in all 50 U.S. states, more information is available at General Dynamics Land Systems, is a business unit of General Dynamics, and is an innovative leader of ground combat systems' equipment and software for our clients. Our performance-driven team partners with the U.S. Army, U.S. Marine Corp and other militaries across the Globe to ensure that next generation ground combat vehicles are ready to protect our fighting men and women in uniform. General Dynamics Lands Systems provides a competitive compensation package, site specific flexible work schedules, 401(k) with Company Match; Bonus Eligibility, Employee Development Opportunities, Tuition Reimbursement, On-site Amenities, and comprehensive Medical/Dental/Vision Insurance.
As an Equal Opportunity Employer, General Dynamics Land Systems ("GDLS") provides all persons with equal opportunity and access to all aspects of employment process, without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, marital status, age, disability, status as a protected veteran, or membership in any group protected by federal, state, or local anti-discrimination laws. GDLS also is committed to providing reasonable accommodations to individuals with disabilities and disabled veterans.. If, due to a disability, you need an accommodation to search or apply for an opportunity with GDLS, please call 586-825-4000 or send an e-mail to for assistance and let us know the nature of your request and your contact information.
PI273018290
Job Tags
Full time, Local area, Remote job, Worldwide, Flexible hours,